Reference

Model notes

Every station here is a teaching model with a stated boundary. These are the boundaries, and the reasons the instrument behaves the way it does on a laptop.

Signal laboratory

Samples run at 8 kHz and the carrier is deliberately slowed so the trace stays readable; the frequency and symbol-rate readouts are the modelled values. The receiver knows the carrier, the symbol rate and the timing, and applies no error-correction coding. Bit errors are counted against the transmitted bits, so they are measured, not assumed.

Field view

E and B are drawn as normalised sinusoids in quadrature around a propagation axis. This is a teaching picture, not an antenna solver: there is no impedance, radiation pattern or near-field transition in the drawing.

Spectrum plot

A Hann-windowed 1024-point FFT of the sampled channel signal, plotted in dB relative to the strongest bin. It describes the display model, not a calibrated measurement, and its resolution is one bin of the sample rate divided by 1024.

Propagation

Ideal free-space Friis with 1 W transmit power and unit gains. The estimate is withheld closer than 2D²/λ for a 2 m aperture. There is no multipath, ground reflection, atmospheric absorption, rain or obstruction, so a real link will usually be worse.

Electromagnetic spectrum

A logarithmic axis from 10 kHz to 1 ZHz. Band boundaries are approximate and overlap, especially between X-rays and gamma rays, which are distinguished by origin as much as by frequency. Photon energy follows E = hf; it is not the same quantity as transmitted power.

Magnetic near field

Coupling is modelled as cosθ / (1 + d²)^1.5 with separation in coil radii. The energised threshold is illustrative, not a device-range prediction. Induced voltage, passive power and load modulation are described qualitatively; no protocol is simulated.

Kept steady on purpose

  • Nothing polls a server. The only optional external request is the web font.
  • Each canvas stops drawing when it scrolls off screen or the tab is hidden.
  • Device pixel ratio is capped at 2, so a laptop is never asked for a four-times buffer.
  • Motion can be switched off from the header; every trace then renders a single frame.
  • Waveform maths is independent of display resolution: the samples do not change with the window.
  • The microphone is opt-in, never recorded or uploaded, and stopped when you leave the laboratory.

Sources

  1. 01Faraday's law of induction and Maxwell's equations for the field relationships shown in the field view.
  2. 02H. T. Friis, “A note on a simple transmission formula”, Proceedings of the IRE, 1946, for the free-space power relationship.
  3. 03ITU Radio Regulations, Article 2, for the frequency band designations used in the spectrum explorer.
  4. 04ISO/IEC 14443 and ISO/IEC 15693, for proximity and vicinity coupling cards, power transfer and load modulation.
  5. 05CODATA recommended values of the Planck constant and the elementary charge, for the photon-energy conversion.

Educational instrument. None of these readouts should be used as a substitute for a calibrated measurement or a link budget that carries safety or regulatory consequences.